No products in the cart.
The Arya Plast Machine Group is one of the largest designers and manufacturers of navigation buoy molds. This floater, which is used in marking and guiding marine transportation, can be produced in different classes and grades.
Some of the most advanced equipment that this boat is equipped with are flashing lights and solar cells.
All the connections used on its body are stainless and galvanized.
If you intend to use these floaters in the sea, contact the numbers on this website and get the necessary advice from the specialists of this collection to buy this product and also purchase the navigation buoy mold.
The navigation buoy mold is made of steel and is produced by the cold rolling method.
This method is one of the most common methods of producing metal molds in which the desired metal is shaped. In fact, this metal is passed through two rollers and changes its shape due to pressure.
Compared to the casting method, this method is superior both in terms of volume and quantity. If the temperature of the metal is lower than its recrystallization temperature, it is known as cold rolling.
Some of the advantages of this method are things such as tolerance and low finish level, the ability to make sheets with low thickness, easy lubrication, and high-quality steels used.
This mold is used in the roto-molding process and hollow polyethylene product is produced by it.
The raw material for the production of these products is colored polyethylene powder obtained from string granules.
The powder is used in the production process using the rotational method. Its use is that colored powder is first poured into special steel molds. Then this mold is installed on the end part of the perpendicular axes and they enter special ovens.
Inside these furnaces, the operation of rotation and heating has started, and due to the centrifugal force, the molten powder sticks to the wall of the navigation buoy mold.
At this stage, the temperature of the formed product is high. Cooling operation is done by water flow or air flow and the product is taken out from inside the mold.
It should be noted that the powder that is poured into the molds as a raw material is made from string granules.
In other words, the granule enters the grinding machine and after the grinding process, a uniform-colored powder is produced. The more uniform the powder, the higher the quality of the final product.
Navigation floaters (or guides) are made of 1750 and 2600-liter volumes and made of first-class polyethylene materials.
These buoys are a good substitute for lighthouses and advanced samples are produced daily.
